Tensioner manufacturer: When clamping the wire rope, the fixed eccentric buckle model should be able to reciprocate the movement. Pipe tensioner: gradually rise to the top to prevent skewing and maintain balance. Is there rigging on the steel wire rope? During the lifting and hoisting work, what are the rigging angle of the rigging? In the wire rope, there is a rigging, we call it wire rope sling. In addition, in addition to this, there are wire rope slings and so on. Generally speaking, in the lifting and hoisting operation, it is stipulated that the rigging angle of the rigging shall not be less than 45 degrees. 2. What are the considerations of rigging? And, what is the assembly of the eccentric buckle type mechanical and electrical engineering lifting technology? Generally speaking, considering the rigging, there are load, size, weight and lifting method. And, for those listed, they are taken into account in the calculation process. At the same time, there are working restrictions required, working environment, etc., which should not be ignored. However, in terms of overall requirements, it is required to have sufficient capacity and meet the requirements of use. In electromechanical engineering lifting technology, the rigging mentioned in the specific category includes wire rope, pulley set, hoist and balance beam, all of which are essential. Therefore, we cannot afford to make mistakes in understanding or miss any of them.