A. What is meant by tensioner.
Tensioner is applied in the delivery of goods, moving, transportation or storage logistics when fixed immobile role, they have a card tightness, not easy to fall, can be trusted, lightweight, practical operation is simple, maintenance objects will not be damaged. They can be used in various natural environments according to different types of hooks. Also known as bolt tighteners, tighteners, binders, tighteners, and fastening straps. Tensioner is similar to the button lock, the role is also to better tense the two pieces, only the way is different.
Second, the characteristics of the tensioner.
1, the tensioner has a regulator to break the compressive strength
2, the actual operation is simple
3, low cost and high efficiency
4, can replace the same main purpose of other goods: such as galvanized steel wire rope, shackles, etc.
5, tensioner in the delivery of goods, moving or storage logistics to play a fixed immobile effect. After clamping, with not easy to fall, can be trusted, lightweight, easy to operate and other characteristics, to maintain the object will not be damaged.
6、A variety of specifications to choose from
Three, how to choose a tensioner.
The key from the following multiple levels.
1. Total width - the total width of the tensioner webbing is generally 25mm38mm50mm75mm100mm etc.
2. Compressive strength - tensioner can bear the security load and rupture load
3. Style is generally divided into hook and hookless type
Fourth, the operation method of the tensioner
The first step: two hooks each hooked on the base, webbing overseas must be fixed immobile goods.
The second step: open the tensioner hardware, webbing from the middle of the cross, and then from the middle of the rotation axis back through
The third part: should tighten the webbing
The fourth part: shake the door puller back and forth to tighten the webbing, fixed immobile to carry out.
The fifth step: the following process for loosening off the tensioner way , pinch the door puller insurance piece, the tensioner hardware open to a larger, fully automatic rotation axis loose.
Sixth step: draw out the webbing, loosen the tensioner to carry out
No hook type
With the tensioner webbing will be the base and must be fixed immovable goods overall around a circle, the following process and the same as the hook type.
V. Frequently asked questions about the use of tensioners.
1. Only apply undamaged straps, the logo can clearly indicate the working ability.
2. When applying, please make the textile avoid sharp edges as much as possible to avoid damage or laser cutting.
3. Prevent twisting and twisting layout tensioner.
4. Do not apply overweight.
5. Do not need to tie the webbing to apply.
6. Do not place the object on the tensioner to prevent damage.
7. Do not use the tensioner as a load lifting adjustment application.